Hypertherm MicroEDGE Pro Shape Cutting Control Rev.2 - Manual (Page 41)

SpecificationS
MicroEDGE Pro Instruction Manual 807290 1-7
System specifications
System features
Processor
Intel ® Processor
Operating system Windows XPe
Software Phoenix version 9.7.1 or later
LAN ports 1 Ethernet port for general use
Hypernet Port 1 for communication with Hypernet-enabled systems
USB ports 5 USB 2.0 ports
Serial ports
4 (2 RS-232 and 2 isolated RS-232/RS-422 configurable ports) with D-sub 9-pin
connectors
VGA port 1 standard 15-pin port for monitor
Onboard monitoring
devices
Hardware monitoring, including fan, CPU temperature, voltages, POST display
Hard drive SATA drive
THC support 2 Sensor THCs or 4 ArcGlide THCs (over Hypernet or discrete connections)
Certification cCSAus, CE, GOST-TR, c-Tick, UkrSEPRO
Configuration HyPath Picopath SERCoS II SERCoS III
Number of I/O 24/24 12/12 512/512 512/512
I/O Type
Input: positive logic
Output: contact
closure
Input and output:
Negative logic
Fiber optic ring Ethernet
Axes available 2-4 2-4 2-12 2-12
Power
AC Input
• Voltage: 100 VAC to 240 VAC
• Current: 1.3 amps at 100 VAC / 0.6 amp at 240 VAC
• Frequency: 50/60 Hz
Slow blow fuse 2 amp, 250 VAC
HyPath
Picopath SERCoS II SERCoS III
DC available for I/O 24 V at 1.5 Amps 24 V at 1.5 Amps
Environmental
Temperature
0º C to 40º C (32º F to 104º F)
Humidity 50% relative humidity at 40º C, 90% relative humidity at 20º
Ingress Protection IP2X according to IEC 60529. Protect the equipment from exposure to excessive moisture.
Mechanical
Height
238 mm (9.38 in.)
Width 463 mm (18.22 in.)
Depth 332 mm (13.08 in.)
Weight 15.9 kg (35 lbs)