Harken HC9045 Battcar Switch System - Manual (Page 16)

16 26 mm/32 mm Battcar Switch System 07/20/11
Trysail Switch System
Part
No. Description
Length Width Weight Fasteners
Maximum
working load
in mm in mm oz g mm lb kg
26 mm
C9493 Port trysail switch*‡ 14 1 /
2
368 4 25 /
32
121 27 762 6 — —
C9492 Starboard trysail switch*‡ 14 1 /
2
368 4 25 /
32
121 27 762 6 — —
C9494 Car body*‡ 2 3 /
8
60 1 1 /
32
26 5 143 — 1001 454
32 mm
C9341 Port trysail switch*‡ 16 406 5 7 /
8
149 43 1222 8 — —
C9340 Starboard trysail switch*‡ 16 406 5 7 /
8
149 43 1222 8 — —
C9342 Car body*‡ 2 15 /
16
75 3 1 /
32
77 11 309 — 595 270
Preassembly
Use standard track and bend to transition
between side tracks and switch. The cars
should not be under load in this section.
Installer is responsible for determining
thebend of the track. A compound bend
isrequired to transition from the side of
themast to the aft face.
IMPORTANT! Special care must be taken so
that the trysail or standard cars do not hit
the adjoining track.
Installing Track
Consult with mast builder. Use suitable
reinforcing plates when fastening track
to carbon spars.
Loading Cars
Load cars with guide pins on the same side
as the trysail storage track. If storage track
is on the starboard side, make sure pins
are on starboard side when loading onto
track.
Sailmaker instructions
Place cars so that there are none in the
special compound bend track section or
switch. Cars placed in this area under
load will damage fingers of switch.
*Available in black or clear anodized ‡Allow 8 weeks lead time
Trysail car
C9342
C9494
Guide pins
Trysail switch
C9493
C9492
C9341
C9340
Trysail storage
track Main
track
No load in this area of tr
ysail track