Harken 1027 MKIII Hydraulic Jib Reefing & Furling - Manual (Page 16)

16 Hydraulic 3/3.25 April 2000
■ INSTALL THE TORQUE TUBE
Secure the torque tube to the lower unit using the six
cap screws provided. Use blue Loctite ® on the screws.
■ RAISE FOILS
Push the foils to the correct height.
Use an allen wrench to secure the torque tube to the foils
using the two screws provided.
Use blue Loctite
® on the screws.
TIP: Insert all six screws BEFORE tightening.
Assembly Install Torque Tube