Saving the configuration changes, Rebooting from remote locations, Bluetooth – Grandstream GXP2130 Administration Guide User Manual
Page 71: Figure 6 upload selected wallpaper to phone
GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.23
GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE
Page 69 of 81
Figure 6 Upload Selected Wallpaper to Phone
SAVING THE CONFIGURATION CHANGES
After users makes changes to the configuration, press the "Save" button will save but not apply the
changes until the "Apply" button on the top of web GUI page is clicked. Or, users could directly press
"Save and Apply" button. We recommend rebooting or powering cycle the phone after applying all the
changes.
REBOOTING FROM REMOTE LOCATIONS
Press the "Reboot" button on the top right corner of the web GUI page to reboot the phone remotely. The
web browser will then display a reboot message. Wait for about 1 minute to log in again.
BLUETOOTH
Bluetooth is a proprietary, open wireless technology standard for exchanging data over short distances
from fixed and mobile devices, creating personal area networks with high levels of security.