Grandstream GXP2130 Administration Guide - Manual (Page 43)

GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.23 GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE Page 41 of 81
remain in the conference call. The default setting is "No".
No Key Entry Timeout (s)
Defines the timeout (in seconds) for no key entry. If no key is pressed after the
timeout, the digits will be sent out. The default value is 4 seconds. The valid
range is from 1 to 15.
Use # as Dial Key
Allows users to configure the "#" key as the "Send" key. If set to "Yes", the "#"
key will immediately dial out the input digits. In this case, this key is essentially
equivalent to the "Send" key. If set to "No", the "#" key is included as part of the
dialing string and please make sure the dial plan is properly configured to allow
dialing # out. The default setting is “Yes”.
DND Call Feature On
Configures DND feature code to turn on DND, your phone will send INVITE
with the feature code you configured to your server.
DND Call Feature Off
Configures DND feature code to turn off DND, you phone will send INVITE
with the feature code you configured to your server.