Grandstream GXP2130 Administration Guide - Manual (Page 60)

GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.23 GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE Page 58 of 81

Product model/version on boot up (INFO level);

NAT related info (INFO level);

sent or received SIP message (DEBUG level);

SIP message summary (INFO level);

inbound and outbound calls (INFO level);

registration status change (INFO level);

negotiated codec (INFO level);

Ethernet link up (INFO level);

SLIC chip exception (WARNING and ERROR levels);

memory exception (ERROR level).
Send SIP Log
Configures whether the SIP log will be included in the syslog messages.
The default setting is "No".
Auto Recover From
Abnormal
If set to “Yes”, the phone will automatically recover when running abnormal.
The default setting is “Yes”.
Maintenance -> Language
Display Language
Selects display language on the phone. There are 21 languages can be set
as display language, user could also choose “Auto” or “Downloaded
Language” as display language. The default setting is “Auto”.
Default Input Selection
Configure the default input selection.
Multi-Tap: multi-tap to switch character;
Shiftable: select input from available characters.
The default setting is “Multi-Tap”.
Maintenance -> TR-069
ACS URL URL for TR-069 Auto Configuration Servers (ACS).
TR-069 Username ACS username for TR-069.
TR-069 Password ACS password for TR-069.
Periodic Inform Enable
Enables periodic inform. If set to "Yes", device will send inform packets to
the ACS. The default setting is "No".
Periodic Inform Interval Sets up the periodic inform interval to send the inform packets to the ACS.
Connection Request
Username
The user name for the ACS to connect to the phone.
Connection Request
Password
The password for the ACS to connect to the phone.
Connection Request
Port
The port for the ACS to connect to the phone.