Grandstream GXP2130 Administration Guide - Manual (Page 56)

GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.23 GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE Page 54 of 81
Broadsoft IM&P password, not the Broadsoft account password.
Broadsoft IM&P
Enables Broadsoft Instant Message and Presence feature. The default
setting is “Disabled”.
Associated Broadsoft Account
Specifies the associated account. User could choose each account on
the phone.
Auto Login
Choose to whether or not login to the Broadsoft IM&P account at
boot-up. The default setting is “No”.
Display Non XMPP Contacts
Choose whether or not to display non-xmpp contacts associated with the
Broadsoft IM&P user. Non-xmpp contacts will not display a presence or
status message. The default setting is “No”.
NETWORK PAGE DEFINITIONS
Table 10: Network Page Definitions
Network -> Basic Settings
Internet Protocol Selects Prefer IPv4 or Prefer IPv6. The default setting is “Prefer IPv4”.
IPv4 Address Type
Allows users to configure the appropriate network settings on the phone to
obtain IPv4 address. Users could select "DHCP", "Static IP" or "PPPoE". By
default, it is set to "DHCP".
DHCP Host name
(Option 12)
Specifies the name of the client. This field is optional but may be required by
some Internet Service Providers.
DHCP Vendor Class ID
(Option 60)
Used by clients and servers to exchange vendor class ID. The default setting
is
“Grandstream GXP2130”/”Grandstream GXP2140”/”Grandstream
GXP2160”.
PPPoE Account ID Enter the PPPoE account ID.
PPPoE Password Enter the PPPoE Password.
PPPoE Service Name Enter the PPPoE Service Name.
IPv4 Address Enter the IP address when static IP is used.
Subnet Mask Enter the Subnet Mask when static IP is used for IPv4.
Gateway Enter the Default Gateway when static IP is used for IPv4.
DNS Server 1 Enter the DNS Server 1 when static IP is used for IPv4.
DNS Server 2 Enter the DNS Server 2 when static IP is used for IPv4.
Preferred DNS Server Enter the Preferred DNS Server for IPv4.
IPv6 Address Type Allows users to configure the appropriate network settings on the phone to