Grandstream GXP2130 Administration Guide - Manual (Page 49)

GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.23 GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE Page 47 of 81
Date Display Format
Configures the date display format on the LCD. The following formats are
supported:

yyyy-mm-dd: 2012-07-02

mm-dd-yyyy: 07-02-2012

dd-mm-yyyy: 02-07-2012

dddd, MMMM dd: Friday, October 12

MMMM dd, dddd: October 12, Friday
The default setting is yyyy-mm-dd.
Time Display Format
Configures the time display in 12-hour or 24-hour format on the LCD. The
default setting is in 12-hour format.
Settings -> Web Service
Enable Weather Update
Configures to enable or disable weather update on the phone. The
default setting is "Yes". If set to "No", the weather information screen will
not show.
City Code
Configures weather city code for the phone to look up the weather
information. The default setting is "Automatic" and the weather
information will be obtained based on the IP location of the phone if
available. Otherwise, specify the self-defined city code. For example,
USCA0638 is the city code for Los Angeles, CA, United States.
Update Interval
Specifies the weather update interval (in minutes). The default value is
15 minutes.
Degree Unit
Specifies the degree unit for the weather information to display on the
phone. User could chose Fahrenheit, Celsius, or Auto to display the
degree unit. The default setting is “Auto”.
Enable Currency Update
Configures to enable or disable currency update on the phone. The
default setting is "Yes". If set to "No", the currency information screen will
not show.
Currency Code
Configures currency code for the phone to look up and display the
currency information. The default setting is:
“EUR/USD;GBP/USD;CAD/USD;AUD/USD;CNY/USD;JPY/USD”
Settings -> XML Application
Server Path
Configures the server path to download the idle screen XML file. This
field could be IP address or URL, with up to 256 characters.
Softkey Label
Specifies the softkey name displayed on the idle screen for the users to
enter XML application. The default Softkey Label is “XMLApp”.
Settings -> Programmable Keys