Grandstream GXP2130 Administration Guide - Manual (Page 25)

GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.23 GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE Page 23 of 81
o Power
Turns on/off the Bluetooth feature.
o Handsfree Mode
Enable/Disable Handsfree mode
o Bluetooth Name
Specifies GXP phone name when discovered by other Bluetooth
devices.
o Start Scan
Starts to scan other Bluetooth devices around the phone. If found,
user could press “Pair” soft key, and enter Pin code to pair to other
Bluetooth devices.

Upgrade
o Firmware Server
Configures firmware server for upgrading the phone.
o Config Server
Configures config server for provisioning the phone.
o Upgrade Via
Specifies upgrade/provisioning via TFTP/HTTP/HTTPS.
o Start Provison
Starts Provision immediately.

Factory Functions
o Diagnostic Mode
All LEDs will light up. All keys ’ name will display in red on LCD
screen before diagnosing. Press any key on the keypad to
diagnose the key ’s function. When done, the key’s name will
display in blue on LCD. Lift and put back the handset to exit
diagnostic mode.
o Audio Loopback
Speak to the phone using speaker/handset/headset. If you can
hear your voice, your audio is working fine. Press “Exit” soft key to
exit audio loopback mode.
o LCD on/off
Selects this option to turn off LCD. Press any button to turn on
LCD.