Grandstream GXP2130 Administration Guide - Manual (Page 52)

GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.23 GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE Page 50 of 81
the Value field to be dialed.

Speed Dial via active account
Similar to Speed Dial but it will dial based on the current active
account. For example, if the phone is offhook and account 2 is active,
it will call the configured Speed Dial number using account 2.

Voice Mail
Select Account and enter the Voice Mail access number in the Value
field.

Call Return
The last answered calls can be dialed out by using Call Return. The
Value field should be left blank. Also, this option is not binding to the
account and the call will be returned based on the account with the
last answered call.

Intercom
Select Account, and enter the extension number in the Value field to
do the intercom.

LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP
search base in the Description field. It could be the same or different
from the Base in LDAP configuration under Advanced Settings. The
Base in LDAP configuration will be used if the Description field is left
blank. Enter the LDAP Name/Number filter in the Value field.
For example:
If users set MPK 1 as “LDAP Search” for “Account 1”, and set filters:
Description -> ou=video,ou=SZ,dc=grandstream,dc=com
Value -> sn=Li
Since the Base for LDAP server configuration is
“dc=grandstream,dc=com”, “ou=video,ou=SZ” is added to narrow the
LDAP search scope. “sn=Li” is the example to filter the last name.
Multi-Purpose Key(Only for
GXP2130/GXP2160)
/Extension Boards(Only for
GXP2140)
Assigns a function to the corresponding Multi-Purpose Key. The key
mode options are (For GXP2130 and GXP2160, user could also keep
pressing a MPK 3 seconds on the phone to configure the MPK feature on
LCD):

Speed Dial
Select the Account to dial from. And enter the Speed Dial number in
the Value field to be dialed.

BLF (Busy Lamp Field)
This option has to be supported on the PBX and it indicates the