Grandstream GXP2130 Administration Guide - Manual (Page 58)

GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.23 GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE Page 56 of 81
connecting a PC to the PC port. The default setting is "Enabled".
Enable LLDP
Control the LLDP (Link Layer Discovery Protocol) service. The default setting
is “Enabled”.
MAINTENANCE PAGE DEFINITIONS
Table 11: Maintenance Page Definitions
Maintenance -> Web Access
User Password Set new password for web GUI access as User. This field is case sensitive.
Confirm Password Enter the new User password again to confirm.
Current Admin Password The current admin password is required for setting a new admin password.
New Password
Set new password for web GUI access as Admin. This field is case
sensitive.
Confirm Password Enter the new Admin password again to confirm.
Maintenance -> Upgrade and Provisioning
Firmware Upgrade and
Provisioning
Specifies how firmware upgrading and provisioning request to be sent:
Always Check for New Firmware, Check New Firmware only when F/W
pre/suffix changes, Always Skip the Firmware Check. The default setting is
“Always Check for New Firmware”.
XML Config File
Password
The password for encrypting the XML configuration file using OpenSSL.
This is required for the phone to decrypt the encrypted XML configuration
file.
HTTP/HTTPS User
Name
The user name for the HTTP/HTTPS server.
HTTP/HTTPS Password The password for the HTTP/HTTPS server.
Always Authenticate
Before Challenge
Only applies to HTTP/HTTPS. If enabled, the phone will send credentials
before being challenged by the server . The default setting is “No”.
Upgrade Via
Allows users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS. The default setting is “HTTP”.
Firmware Server Path
Defines the server path for the firmware server. It could be different from the
configuration server for provisioning.
Config Server Path
Defines the server path for provisioning. It could be different from the
firmware server for upgrading.
Firmware File Prefix
Enables your ITSP to lock firmware updates. If configured, only the
firmware with the matching encrypted prefix will be downloaded and flashed