Grandstream GXP2130 Administration Guide - Manual (Page 51)

GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.23 GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE Page 49 of 81

Transfer
Select Account, and enter the number in the Value field to be
transferred (blind transfer) during the call.

Call Park
Select Account, and enter the call park extension in the Value field to
park/pick up the call.

Intercom
Select Account, and enter the extension number in the Value field to
do the intercom.

LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP
search base in the Description field. It could be the same or different
from the Base in LDAP configuration under Advanced Settings. The
Base in LDAP configuration will be used if the Description field is left
blank. Enter the LDAP Name/Number filter in the Value field.
For example:
If users set MPK 1 as “LDAP Search” for “Account 1”, and set filters:
Description -> ou=video,ou=SZ,dc=grandstream,dc=com
Value -> sn=Li
Since the Base for LDAP server configuration is
“dc=grandstream,dc=com”, “ou=video,ou=SZ” is added to narrow the
LDAP search scope. “sn=Li” is the example to filter the last name.

Multicast Paging
This option is for multicast sending. Enter Line key description in
Description filed and multicast sending address in Value field.

Record
This option is for Recording calls. Enter Line key description in
Description filed and the recorded extension number in Value field.
Please make sure whether your VOIP provider supports this feature
before using it.
Softkeys
Assigns a function to the corresponding softkeys. GXP2140/GXP2160
supports 3 configurable softkeys; GXP2130 supports 3 configurable
softkeys. (The first and last softkeys are reserved for Exit/More
functionality.)
The key mode options are:

Speed Dial
Select the Account to dial from. And enter the Speed Dial number in