beautypg.com

Gasboy PA03660XXX User Manual

Page 9

background image

MDE-4705 Additional Serial Ports Installation on an Integral Profit Point System (PA03660XXX) · October 2007

Page 9

Installation Instructions

Figure 5: Advanced Port Settings Window

4

A dialog box appears prompting you to reboot the PC. Click Don't Restart Now.

Figure 6: System Setting Change Dialog Box

5

Click OK in the Settings for COMX: window.

6

Repeat steps

1

to

4

for each of the 4 ports.

7

When the last port is configured, click Restart Now to reboot the PC.

8

Once the PC has booted, log on to Windows NT as the System Administrator.

9

Go back to the Cyber PCI window again and verify if the settings are correct on all the ports. If
the settings are not correct, you may have to change them, one at a time, rebooting each time,
until all ports are set correctly. If the settings are not correct after doing this, contact your
Service Representative or Gasboy Customer Service.