Gasboy Quarles NBS - Manual (Page 29)

MDE-4643 Quarles NBS Configuration and Software Installation Manual · March 2007 Page 25
Restoring the Data
To restore the data, proceed as follows:
1 Type NBS–I. When prompted, save the changes and reboot the system.
2 Insert the customer floppy.
3 Type NBS–R A:NBSQUARLES.TXT and press Enter.
4 Type NBS–M and configure the modem.
5 Press S to save and press Return.
Note: Do not start the reboot process.
6 Type RESTORE EV FR A:SYSBACK.DTA and press Enter.
7 Sign on and type NBS–X. Load the appropriate product cross reference information.
8 Type NBS–E and load the appropriate terminal number.
9 Set the maximum time in fall back to 120.
10 Type SYS_PAR and set the appropriate system ID number on “*** Page 1: *** System
Parameters ***” on page 15 .
11 Reboot the system to complete the installation.
12 Refer to “Site Configuration” on page 6 to ensure that all the settings are correct.
13 Run several test transactions and confirm the following:
• Authorization is successful
• Appropriate dispensers are activated
• Receipt information is correct