Gasboy WEX Special Card Handler - Manual (Page 9)

MDE-4549 Gasboy CFN Series WEX Special Card Handler V003 · February 2006 Page 5
Parameters
Page 5: Console
* Set lockout on local verification (console) = Club.
Must use or the WEX.dta lockout will not be checked.
Page 11: Transaction Miscellany
Allow Supervisor cards: Yes
TRFMT
* Set the first account number, Offset = 0 (zero), to 6 digits, and identify the title as driver
number.
* Set the second account number, Offset = 6, to 5 digits, and identify the title as vehicle
number.
* Set the third account number, Offset = 11, to 6 digits and identify as fleet number.
Reader
Auxiliary number prompt should be “Enter Driver #”. Set the number of digits to 6.
* The “Auxiliary number prompt” step must be before the “Select Pump” step.
Console
Auxiliary number prompt should be “Enter Driver #”.
Other Configurations
Site lockouts can be used to lockout manually entered driver numbers.
If a customer wants to do bit-mapped lockout on the driver #, make sure the lockout is set to 6
digits.