Gasboy Voyager Special Card Handler - Manual (Page 13)

MDE-4410 Gasboy Voyager Special Card Handler Version 001 · June 2005 Page 9
Configuration
2 – Configuration
Restriction/Acceptance Information
Use Table 1 to obtain the “result number” for the type of restriction or acceptance desired. The
result number can be obtained by combining the desired type of test applied to the card from
the intersection of the horizontal row and the vertical column. A shaded block at an
intersection represents an action or type of test that is invalid.
The “result number” from Table 1 can be applied to Table 2 to find the system parameters
needed to set up the system for the desired results. Please review the description of the result
numbers in
Table 3 for more details concerning the type of option selected.
Table 1: Result Number
ID Prompt Entry Number Encoded Card ID Number
To Reject To Accept To Reject To Accept
Encoded Card ID Number
To Reject 1 2 3 —
ID Prompt Entry Number
To Reject 2 — 5 6
ID Prompt Entry Number
To Accept — 7 2 —
Encoded Card ID Number
To Reject 4 — — 8
Table 2: Required System Parameters
Result Number
(from
Table 1 )
Bit
Map voyager.dta Reject
File Negative lockout
file contains: Positive lockout file
contains:
1 13 Encoded Card ID # ID Prompted Entry # —
2 13 Encoded Card ID # — ID Prompted Entry #
3 13 — ID Prompted Entry # —
4 8 — Encoded Card ID # —
5 8 ID Prompted Entry # Encoded Card ID # —
6 8 ID Prompted Entry # — Encoded Card ID #
7 8 — — Encoded Card ID #
8 13 — — ID Prompted Entry #
After making any sys_par changes, the system needs to be rebooted to pickup the
new parameters.
CAUTION