Gasboy CFN Islander II w/Key - Manual (Page 7)

Islander to FleetKey Conversion
04/15/03 5
4. Still inside the head, remove the two screws which secure the optical reader bracket to the
inside face of the unit (the same two screws help secure the bottom of the external card
reader cover assembly). Remove the entire optical reader assembly from the head.
5. Still inside the head, remove the remaining two screws which secure the external reader cover
assembly. NOTE: Be careful when removing this external cover assembly from the face of
the unit because the optical reader adapter plate will come off with it. The four screws and the
reader cover assembly will be reused later; however, the Optical reader adapter plate will not.
6. Proceed with the Installation of Key System instructions.