Gasboy SDI Interface - Manual (Page 11)

4 UNITEC Interface SCIII
Gasboy CFN Series
4. Enter the Product Name - Car Wash.
5. Enter the Minimum Price. A minimum price must be entered.
6. Enter the Maximum Price. A maximum price must be entered.
7. Enter the Taxes that are applicable to this site.
8. Exit Load Product.
Load the price code:
1. Type Load Price
2. Enter the Price Code - this must be the same code as entered in the Car
Wash submenu 3.
3. Enter the Price level. Load your price level for Car Wash.
4. Exit Load Price.
Tie it all together:
1. Type the command POS to send the information from the site to the Profit
Point.
Unitec Wash Discounts
To change the wash discounts, select submenu 5, Unitec wash discounts from the Gate
Menu. The following information is displayed:
Type of discount [0]: The currently supported discount types are:
0: discount type disabled
1: Pumping of at least a given amount of fuel.
Island Card Reader configuration
Check the ICR program step 8, Want car wash. This message must appear before the
“Please Wait” step. The default message is Want Car Wash? Change this if necessary.
Please refer to the chapter, Island Card Reader configuration in the SCIII Configuration
Manual.
Troubleshooting
Car Wash Item on receipt shows VOID
Make sure the Car Wash Product is loaded and with minimum and maximum
prices.
No Car Wash Printed on Receipt
Make sure Stock numbers are loaded in the GATE, submenu 4.
If Car Wash is not printing at the Profit Point, make sure matching stock num-
bers are loaded in the PLU Maintenance menu and the POS command was exe-
cuted at the Site terminal.
# Description
1 None
2 None
3 None
4 None
5 None
------------------------------------------------------
Enter number of discount to modify or q to quit: