Gasboy M14142K001 - Manual (Page 5)

MDE-5163A Boot Switch Kit (M14142K001) Installation Instructions · August 2014 Page 5
Installing Boot Switch Kit (M14142K001)
Installing Boot Switch Kit (M14142K001)
Before installing, read and understand the warnings and safeguard precautions for the remote
dispensers and pumps provided in MDE-4430 Important Warnings and Safeguards.
Removing Mercury Switch
Do not dispose of or incinerate the mercury switch.
Return the entire switch unit for recycling to:
Power Components
56641 Twin Branch Drive
Mishawaka, IN 56545
!
Note: Mercury switch that may be currently installed in the pump/dispenser is no longer
available from the Original Equipment Manufacturer (OEM) supplier (environmental
concerns).
Figure 2: Mercury Switch Configuration (No Longer Available)
E-ring
The current kit uses a magnet/reed switch combination. The magnet/reed switch is
preassembled but it requires some further assembly.
Note: The magnet/reed switch is not as compact as the mercury switch, so it has to be placed
on the right side of the boot instead of the left side where the mercury switch is located.