Gasboy 9800K User Manual
Gasboy Hardware

MDE-4650 CPU Heater Kit Installation Instructions for 9800K Series Pumps · April 2007
Page 1
Introduction
Purpose
This document provides instructions for the installation of the Central Processing Unit (CPU)
Heater Kit on 9800K Series pumps.
Table of Contents
Topic
Page
Installation of the CPU Heater Kit
Required Tools
The following tools are required for the installation of the kit:
• Phillips
®
screwdriver
• 8 mm nut driver or socket
Parts List
The following table lists the parts included in this kit.
Item Description
Part Number
Quantity
M07774A001
(115 VAC)
M07774A002
(220 VAC)
1
Standoff, Printed Circuit Board (PCB)
Snap in 1/4L-
C09695
5
5
2
Support, PC Board
M04768A002
1
1
3
Cable, Heater 115 VAC
M05120A003
1
-
4
Cable, Heater 230 VAC
M05120A004
-
1
5
Nut, Metric, Flange
M00414B005
3
3
6
Screw, Sems PH Phil M3
Q12845-36
2
2
7
Washer, Fiber .192ID X .77
067165
3
3
MDE-4650
CPU Heater Kit Installation Instructions for
9800K Series Pumps
April 2007