Gasboy 9123K Vapor Rcvry Kit - Manual (Page 5)

MDE-4619 Vapor Recovery Kit Installation Instructions for Models 9123K and 9823K • December 2006 Page 5
Installation of the Vapor Recovery Kit for Models 9123K and 9823K
Installation of the Vapor Recovery Kit for Models 9123K
and 9823K
To install the Vapor Recovery Kit for models 9123K and 9823K, proceed as follows:
Installing the Discharge Assembly
1 Remove the front door panel.
Note: A key is required to remove the front door panel.
2 Remove the rear door panel.
Note: A key is required to remove the rear door panel.
3 Remove four nuts from the top cover assembly and remove the top cover.
4 Remove the discharge pipe nipple from the discharge elbow.
5 Install the new Vapor Recovery Discharge Assembly as shown in Figure 1 on page 6 .