Gasboy 9123K Vapor Rcvry Kit - Manual

MDE-4619 Vapor Recovery Kit Installation Instructions for Models 9123K and 9823K • December 2006 Page 1
Introduction
Purpose
This manual provides installation instructions for the following kits:
• M07494K001 - Vapor Recovery Kit for 9823K
• M07494K002 - Vapor Recovery Kit for 9823K (Complete)
• M07494K003 - Vapor Recovery Kit for 9123K (Complete)
• M07494K004 - Vapor Recovery Kit for 9123K
Note: Vapor Recovery Kits do not include high hose retriever, hose, nozzle, swivel, and
breakaway.
Read all instructions before beginning the installation. Ensure that you read and obey
all warnings and safeguards as outlined in the
“Important Safety Information” on
page 3 . Before performing any work that may produce sparks (for example, drilling, use
of power tools, and so on), place the dispenser at a safe distance from flammable
materials.
IMPORTANT INFORMATION
Table of Contents
Topic Page
Introduction 1
Purpose 1
Table of Contents 1
Required Tools 1
Parts List 2
Warranty 2
Important Safety Information 3
Installation of the Vapor Recovery Kit for Models 9123K and 9823K 5
Installing the Discharge Assembly 5
Vapor Recovery with High-hose Retriever 7
Required Tools
The following tools are required for the installation of the Vapor Recovery Kit for models
9123K and 9823K:
• Phillips ® screwdriver
• Straight blade screwdriver
MDE-4619
Vapor Recovery Kit Installation Instructions for
Models 9123K and 9823K
December 2006