Gasboy Submersible Drv Relay Kit - Manual (Page 5)

MDE-4596 Atlas™ Submersible Drive Relay Kits (M05816K00X) Installation Instructions · August 2006 Page 5
Installing the Atlas Submersible Drive Relay Kit
Installing the Atlas Submersible Drive Relay Kit
Preparing for the Installation
1 Request permission from the manager/owner to turn off the circuit breakers for MICRO,
LIGHTS and FEED. Perform the lockout/tagout safety procedures.
2 Ensure that you have the proper kit for the model unit to be retrofitted.
3 Follow all applicable safety rules and procedures.
Installing the Atlas Submersible Drive Relay Kits
1 Unlock and remove the front panel.
Unlock
Bezel Screws (behind front panel)
2 Remove the two screws securing the bezel assembly and remove the assembly.
3 Remove the two screws securing the display panel and pivot display panel down. The unit will
swing forward and down after screws are removed.
Screws