Gasboy Ultra-Hi Mech Totalizer Kit - Manual (Page 5)

MDE-4568 Atlas Ultra-Hi Mechanical Totalizer Kit Installation Instructions · April 2006 Page 5
Installing the Mechanical Totalizer Kits M06943KXXX
Installing the Mechanical Totalizer Kits M06943KXXX
Preparing for the Installation
1 Request permission from the manager/owner to remove power from the unit and then remove
power using normal procedures. Perform the lockout/tagout safety procedures.
2 Ensure that you have the proper kit for the model unit to be retrofitted.
3 Follow all applicable safety rules and procedures.
Installing the Mechanical Totalizer Kits
1 Unlock and remove the lower panel.
2 Remove the existing hardware from the totalizer window.
3 Assemble and install the new totalizer assembly with the existing hardware, as shown in
Figure 1 .
Figure 1: Totalizer Assembly
(2) Nut Hex W/Ext Lockwsr 6-32
(Q12068-02)
Odometer (039829/30)
(2) Screw PPHD 6-32 x .50
(Q11270-36)
(2) Nut Hex Flg M4
(M00414B005)
Shielded Flex Cable Assembly
(017365)
Totalizer
Bracket
(015129)
Spirol Pin (Q10038-29)
4 Install the cable assembly with the Spirol pin to the odometer assembly.