Gasboy Cold Weather External Filter Upgrade Kit User Manual
Introduction, Required reading, Required tools
Table of contents
Document Outline
- Introduction
- Important Safety Information
- Removal and Installation Instructions
- Parts In Kit
- 1 Ensure power to unit has been removed and locked out.
- 2 Release any residual pressure through the hose nozzle into an approved container.
- 3 Place approved catch pan and absorbent material to catch any fuel.
- 4 Wearing safety goggles, carefully remove existing filter adapter. Save piping for reuse.
- 5 Remove and discard black gaskets that come with come with the filters.
- 6 Install new filter adapter (P/N 025903, rev D or later) onto piping using UL approved gas and oil resistant pipe compound on male threads only.
- 7 Install filter elements (PN/ 0259000 or P/N 0259001) using the blue fluorosilicone gaskets (M06450B001) in the kit.
- 8 Install the remaining piping with approved pipe compound.
- 9 Dispose of any fuel or absorbent material properly.
- 10 Put unit into service and check for leaks and proper operation.
- Parts In Kit