Gasboy XU2A - Manual (Page 16)

Pump Maintenance
Page 16 MDE-4320 Gasboy UHF Pump, Blackmer® XU2A Rebuild Kit Installation Manual • June 2004
Pump Maintenance
Note: Maintenance shall be performed by qualified technicians only following the appropriate
procedures and warnings as presented in this manual.
Scheduled Maintenance
Strainers:
Strainers must be cleaned regularly to avoid pump starvation. Schedule will depend upon the
application and operating conditions.
Pump Lubrication
The pump’s ball bearings must be lubricated every three months at minimum. More frequent
lubrication may be required, depending on the application and the operating conditions.
Recommended Grease:
Exxon
® - Ronnex MP Grease
Mobile ® - Mobilith AW-2 (64353-6) Grease, or equivalent.
Failure to disconnect and lockout electrical power before attempting maintenance can
cause serious personal injury or death.
DANGER !
If pumping hazardous or toxic fluids, system must be flushed and decontaminated,
inside and out, prior to performing maintenance.
WARNING !
Failure to relieve system pressure prior to performing pump service or maintenance
can cause personal injury or property damage
WARNING !
When pump is running disconnecting any part of the liquid system, pipe, strainer,
hose, nozzle, etc. can cause serious personal injury, death or major property damage.
DANGER !