Gasboy XU2A User Manual
Introduction, Purpose of this manual, Important notice

MDE-4320 Gasboy UHF Pump, Blackmer® XU2A Rebuild Kit Installation Manual • June 2004
Page 1
Introduction
Purpose of this Manual
This manual contains information on the installation of the Blackmer
®
XU2A rebuild kit as
used in Gasboy
®
self-contained products.
This manual is written for Gasboy Authorized Service Contractors (ASCs) who will be
installing the kit. It is recommended that only ASCs install this kit.
Important Notice
Blackmer XU2A pumps must only be installed in systems which have been designed by
qualified engineering personnel. The system must conform to all applicable local and national
regulations and safety standards.
All parts and required kits are listed in the
at the rear of this document.
This manual MUST be kept with the pump.
Required Reading
Before servicing the pump, the technician must read, understand, and follow
this manual.
Failure to do so may adversely effect the safe use and operation of the equipment.
Related Documents
Note
The "Note" designation indicates within the manual special instructions which are very
important and must be followed.
Document Number
Document Name
GOLD
®
Library
035297
Series 9800A Pump/Dispensers
Parts List
Gasboy Commercial & Retail Pumps
MDE-4320
Gasboy UHF Pump, Blackmer
®
XU2A
Rebuild Kit Installation Manual
June 2004
Document Outline
- Introduction
- Important Safety Information
- Pump Data
- Installation
- Operation
- Pump Maintenance
- Troubleshooting
- Blackmer Parts List