Gasboy 9800A Series - Manual (Page 52)

GASBOY Series 9800A
46 03/07/03
9800A TWIN DIAL ENCLOSURE ASSEMBLY
Models: 9853ATW2, 9852ATW2, 9853ATW1M, 9852ATW1, 9853AXTW, 9852AXTW,
9850AXTW
Item Part No. Description
1 026119 Dial Enclosure Assembly Complete, Twin, Non-Front Load Nozzle models
026126 Dial Enclosure Assembly Complete, Twin, Front Load Nozzle models
(The above assemblies include all items listed below. The standard assembly is silkscreened for gallons. If
your unit of measure is different, order the correct decal, item 14)
2
027019 Gasket, 10 foot strip
3 028753 Dial Glass (See NOTE 1)
4 028839 Display Glass (w/optional silkscreen)
5 Dial Enclosure Face Plate (See NOTE 2)
7 022434 Cover, Mag Switch (See NOTE 1)
8 033716 Dial Lens (See NOTE 1)
10 Graphics Panel (See NOTE 2)
11 011367 Lock Bar, Twin
12 Bezel, Plastic (See NOTE 2)
13 011308 Latch Bar, Twin
14 028977 Measure Decal "Litres" (Order two)
028978 Measure Decal "Liters" (Order two)
028979 Measure Decal "Litros" (Order two)
028980 Measure Decal "Galones" (Order two)
15 028981 Brand decal, GASBOY
16 053737 Screw, 8-32 x 3/8, self-tapping (7 across bottom of sheet metal)
17 053640 Screw, 8-18 x 3/8, self-tapping
18 C08099 Silicone Sealant
NOTE 1: When replacing individual components such as the dial glass or lens, you must use
silicone sealant to properly seal the unit from external moisture.
NOTE 2: The part numbers for the dial enclosure face plate, graphics panel, and plastic bezel are
not listed individually. They must be ordered only as part of the complete dial enclosure
assembly.