Gasboy 9100A - Manual (Page 9)

GASBOY Series 9100A
Contents-2 7120
•
A Reset Complete (switch detect) and optional pulser outputs which allow monitoring of the
register's operation when it is connected to an automated fuel management system.
•
Unions are provided at the inlet of all suction pumps and remote dispensers.
•
All models except the high flow units use a quiet and efficient gear pump which features an
air eliminator, built into the pump casting. The pump meter is a three piston, positive
displacement meter which is tested and calibrated for accuracy at any speed or pressure up
to the maximum working pressure of 50 psi (3.45 Bar).
The high flow model uses a vane-type pump with a separate air eliminator. The pump meter
is a 1 1/2" (38.1mm), six-step, rotary motion, positive displacement unit.
•
The standard cabinet finish is top, sides, and bezel painted black while the front and back
panels are painted white.
•
The height of the cabinets is 52-5/8" (1336.7mm). The other dimensions may be found in
Section 2 of this manual and on the single sheet base layout for each model.
•
Available options and accessories for the GASBOY Series 9100A dispensing units include
Listed automatic nozzles, lights, high/low slowdown valves, pulsers, special lengths of Listed
hose, Listed dual swivels, internal hose retrievers, filters, front and back pump panels painted
to the color specified by the customer, stainless steel panels, Listed emergency shutoff
valves, satellite piping, top mount ticket printer, and electric keytrol and hand cranks.