Gasboy 9100A - Manual (Page 7)

03/07/03 1-1
Section 1
INTRODUCTION
PURPOSE
The GASBOY Series 9100A Pumps and Dispensers Installation/Operation Manual is provided to
assist the installer in installing and operating the unit. This manual should be supplied to the
electrician prior to the installation of conduit and wiring to ensure the Series 9100A dispensing
unit is installed properly. Faulty installations are the major cause of unit malfunctions. The unit
must be installed and operated as described in this manual to ensure the reliability and proper
operation of the Series 9100A dispensing unit. In addition to installation information, this manual
contains warnings, safeguards and procedures on the use and care of the Series 9100A pumps
and remote dispensers. Be sure to leave this manual with the pump/dispenser owner after the
installation is complete.
☎
Customers and installers having any questions pertaining to the installation should
contact their GASBOY distributor.
GENERAL DESCRIPTION
The GASBOY Series 9100A dispensing units are UL-listed and are available in a self-contained
(suction pump) package or in a remote-controlled (dispenser) package. Both packages offer a
variety of models which are available as single hose outlets or dual hose outlets (with single or
dual product capability). The self-contained models are available in standard speed, up to 15
GPM/56 LPM; in high speed, up to 22 GPM/83 LPM; or in a single hose model with high capacity
speed, up to 26 GPM/99 LPM. The rate of delivery for the remote-controlled packages will vary
according to the size of the submersible pump. The delivery rate of both packages will also vary
depending upon installation conditions and added accessories.
All models of the Series 9100A offer mechanical non-computers complete with electric resets.
Mechanical pump registers show the total volume for a delivery. All non-computers will read up
to 999.9 gallons or liters.
Other features and specifications of the Series 9100A are:
•
Hose hangers.
•
Discharge elbows.
•
A 12-foot Listed gasoline hose assembly.
•
A working voltage of 115 VAC, 60 Hz. for domestic units or 230VAC, 50 Hz. or 60 Hz. for
international use.
•
Mechanical volume totalizers for each hose outlet.