Gasboy Atlas Valve Replacement Kits - Manual (Page 6)

Valve Coil Installation Instructions
Page 6 MDE-4448 Atlas™ Diaphragm and Valve Coil Replacement Kits • April 2005
4 Loosen the union connecting the valve wiring conduit and the junction box. See Figure 1:
Valve Coil Assembly, Conduits and Junction Box on page 5.
5 Remove the red cap from the top of the valve coil assembly. See Figure 2: Valve Coil
Assembly and Diaphragm - Exploded View on page 6.
Figure 2: Valve Coil Assembly and Diaphragm - Exploded View
6 Push down on the valve assembly.
7 Insert the blade of a screwdriver between the nameplate and the valve assembly.
8 Use the screwdriver to pry off the nameplate. Put the red cap and the nameplate aside.
9 Loosen the union connecting the valve coil assembly and the conduit.
10 Rotate the valve coil and conduit. This will allow you to locate the red, black and yellow valve
valve coil assembly
valve coil base
subassembly
O-ring (body)
O-ring (diaphragm)
valve coil base gasket