Gasboy Atlas Valve Replacement Kits - Manual (Page 2)

Introduction
Page 2 MDE-4448 Atlas™ Diaphragm and Valve Coil Replacement Kits • April 2005
Related Document
Follow Codes
Before installing equipment, read, understand and follow the following codes:
• The National Electric Code (NFPA 70)
• The Automotive and Marine Service Code (NFPA 30)
• Any national, state and local codes that may apply
Failure to service the equipment in accordance with these codes may adversely affect the safe
usage and operation of the system.
Before You Begin
1 Read all instructions before beginning work.
2 Follow all safety precautions.
3 Isolate unit at distribution box.
4 Turn off all power to unit. Turn off all associated submerged turbine pump (STP) power. Use
system circuit breakers. Multiple disconnects may be required.
5 Follow Occupational Safety and Hazard Association (OSHA) Lock-Out and Tag-Out
requirements. See MDE-4334 Atlas Service Manual for procedures.
6 Place nozzle(s) into an approved container to drain and bleed pressure. Some residual pressure
may remain.
7 Position an approved container for catching fuel under valve coil and/or diaphragm assembly
being serviced.
Document Number Document Title GOLD® Library
MDE-4434 Atlas Service Manual Gasboy Consumer & Commercial