GAI-Tronics 227-005 SMART Auto-Dial Handset Telephones - Manual (Page 15)

Pub. 42004-443C
SMART A UTO -D IAL H ANDSET T ELEPHONES P AGE
13 of 31
f:\standard ioms - current release\42004 instr. manuals\42004-443c.doc
02/13
7. Using the “Setup” section of this manual,
 Configure the hardware as required. Refer to the “Hardware Configuration” section on page 19
for details.
 Adjust the audio levels, if necessary. Refer to Figure 13 for Receiver Volume and Microphone
Sensitivity potentiometer locations.
8. Verify operation by calling to and from another telephone.
9. Complete the installation by attaching the front panel assembly to the rear enclosure using the four
front panel screws, 10–12 in-lbs. of torque recommended.
Figure 7. Model 247-005 Mounting Details