Foxconn ELA - Manual (Page 83)

5
76
5-2 BIOS Configuration
1. Enter the BIOS setup by pressing key during the POST(Power On Self Test).
2. Select the “Integrated Peripherals” from the “Main menu”, then select the
“OnChip
ATA Devices” item and press to go to the configuration items.
3. Select and Set the “Configure SATA#1 as” option to [RAID].
4. Press to save the setting then PC will reboot itself.
5-3 Create RAID in bIoS
Enter RAID bIoS Setup
When BIOS is restarted, it will display a message asking you to press + keys
simultaneously to enter the main menu of Intel
® Matrix Storage Manager Option ROM
Utility. Press the + to enter Configuration Utility.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume 3. Reset Disks to Non-RAID
2. Delete RAID Volume 4. Exit
RAID Volume : * = Data is Encrypted
None Defined.
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 WDC WD2500JS-60N WD-WCANKC865380 232.9GB Non-RAID Disk
2 Maxtor 6L250S0 L50SKP4G 232.9GB Non-RAID Disk
4 ST3320620SV 9QF4YJGQ 298.1GB Non-RAID Disk
5 ST3300831AS 3NF02XH2 279.5GB Non-RAID Disk
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
Intel(R) Matrix Storage Manager option ROM v8.5.0.1013 ICH10R wRAID5
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
[ DISK/VOLUME INFORMATION ]
[ MAIN MENU ]
1. Create RAID Volume
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
OnChip ATA Devices
Configure SATA#1 as [RAID] Help Item
Max Ports on SATA#1 [6 Ports]
JMicron 36x ATA Controller [IDE Mode]
IDE
RAID
AHCI
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[RAID]
Options