Flowserve MX-85 Actuator - Manual (Page 61)

Flow Control
Limitorque Actuation Systems
FCD LMAIM1341-00 MX-85/140 Maintenance and Spare Parts 53
STEP 5
Fit the clutch ring (#1-37) over the drive sleeve.
With the roller (#15-2) down and holding the latch
(#15-7) 90° from free position. See 5a.
NOTE: The clutch ring socket head cap screw
(#15-9) must fit into hole in housing to keep ring
from rotating. See 5b. See Warning Note in Section
4.8.2, Step 5.
5a
5b
Housing hole for clutch ring screw for
anti-rotation of clutch ring assembly
STEP 6
Slide clutch (#1-38) over drive sleeve assembly.
6
1-38