Flowserve MX-85 Actuator - Manual (Page 60)

Flow Control
Limitorque Actuation Systems
52 MX-85/140 Maintenance and Spare Parts FCD LMAIM1341-00
STEP 4
Remove clutch ring (#1-37).
While pulling up on clutch ring end with socket
head cap screw (#15-9), rotate latch 90° and slide
clutch ring over drive sleeve and out of housing.
4
1-37
4.9.2 Remounting
c WARNING: Potential to operate while dangerous mechanical parts are exposed during subassembly removal.
To prevent injury, turn off all power sources to actuator before removing clutch and clutch ring components.
Power sources may include: main power or control power.
Table 4.11 – Clutch Ring Assembly Parts List
Part Number Description Qty.
15-1 Clutch Ring 1
15-2 Roller 1
15-3 Roll Pin 1
15-4 Spacer 1
15-5 Latch Spring 1
15-6 Roll Pin 1
15-7 Latch 1
15-8 Roll Pin 1
15-9 Socket Head Cap Screw 1
Figure 4.10 – Clutch Ring
15-1
15-2
15-3
15-6
15-8
15-7
15-9
15-4
15-5