Faronics Insight User Manual
Page 60
Faronics Insight User Guide
60
|
Installing Faronics Insight
Wireless Performance Tweaks
If you optionally wish to improve performance, you can attempt to configure your Access Point
(AP). Since this differs from vender to vender, we can only give general guidelines. You'll have to
consult your Access Point's manual to see how to actually make the change on your particular
Access Point.
1. Drop the Beacon Interval as low as possible. Generally, this can go down to 50ms.
2. Set the DTIM to ZERO. This allows broadcast and multicast packets to be sent after EVERY
beacon packet.
3. Increase the Broadcast or Multicast speed. Not all AP's allow this to be set.