Dell OptiPlex GX240 - Manual (Page 69)

Installing Upgrades 71
S m a l l M i n i -To w e r C o m p u t e r
6 If you are installing a new expansion card, remove the filler bracket for
an empty card-slot opening. Then continue with step 8 .
NOTE: The AGP
expansion slot only
supports 1.5-V cards.
7 If you are replacing an expansion card that is already installed in the
computer, remove the expansion card.
If necessary, disconnect any cables connected to the card. Grasp the
card by its top corners, and ease it out of its connector.
8 Prepare the expansion card for installation.
1 expansion card
2 card-edge connector
3 expansion-card connector
4 retention arm
5 lever
1
2
3
4
5