Dell OptiPlex GX240 - Manual (Page 114)

116 Installing Upgrades
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
S m a l l M i n i -To w e r C o m p u t e r
2 Check all connectors to be certain that they are properly cabled and
firmly seated.
NOTICE: To avoid possible damage to the computer, you must match the
colored stripe on the hard drive data cable with pin 1 on the hard drive (IDE1)
connector and with the system board interface connector (IDE1).
To locate the IDE connector 1 (IDE1) on the system board, see
“ System Board Components .”
3 On the small desktop computer, replace the hard drive shroud by
inserting the two tabs on the bottom into the holes in the computer
and snapping the top into place.
4 Close the computer cover , reconnect your computer and devices to
their electrical outlets, and turn them on.
1 power cable
2 IDE cable
3 IDE1 connector
3
1
2