Restart a computer that is not responding, Repairing a wet computer, Restart a computer that is not – Dell OptiPlex GX240 User Manual
Page 171: Responding
174
Solving Problems
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
Did the Task Manager window or Close Program window appear?
Yes. Go to
.
2
Click the program that no longer responds.
3
Click End Task.
Is the computer operating properly?
Yes. The problem is resolved.
No. Go to
.
4
Click the Start button and select Shut Down.
Restart a Computer That Is Not Responding
1
Press and hold the power button until the computer turns off.
2
Press the power button to turn on the computer.
Repairing a Wet Computer
Spills, splashes, and excessive humidity can cause damage to the computer.
If an external device, such as a printer or modem, gets wet, contact the
manufacturer of the device for instructions.
CAUTION:
Before you perform this procedure, see “
Fill out the Diagnostics Checklist as you perform the following steps:
1
Turn off the computer and devices, disconnect them from their
electrical outlets, wait 10 to 20 seconds, and then open the computer
cover.
2
Let the computer dry for at least 24 hours. Make sure that it is
thoroughly dry before you proceed.
3
Remove all expansion cards installed in the computer except a video
expansion card.