equinux VPN Tracker 6.4.6 User Manual
Page 69

the VPN gateway used for availability testing is located on the Internet, the
test results reflect the connectivity from your location to VPN gateways on the
Internet, but may not be accurate for the connection to your VPN gateway
that is handled differently.
In that case, you can open the VPN Availability Test and tell VPN Tracker to ig-
nore the test results for this specific location.
To disable testing entirely, go to
What if my local router changes? What if a firmware up-
grade changes its capabilities?
If you exchange the router for a different device, VPN Tracker will notice
automatically (it uses the router's hardware address (MAC) to remember
where it tested).
If only the firmware is updated, or you are using an Internet connection where
NAT-Traversal happens off-site at your Internet Service Provider (ISP), VPN
Tracker cannot detect it. In that case, please open the VPN Availability Test and
repeat the test.
69