equinux VPN Tracker 6.4.6 - Manual (Page 47)

Settings Reference
This chapter describes the settings available in VPN Tracker.
Settings are grouped by location and sorted from top to
bottom as they occur in VPN Tracker. Where possible, related
settings and the corresponding settings on a VPN gateway
(and the terms different vendors use) are also included.
Basic Tab
VPN Gateway
The public IP address or host name of the VPN gateway that VPN Tracker con-
nects to.
Related Settings: Advanced > IPv6 > Use IPv6 VPN gateway address when
available
Availability: always
VPN Gateway Setting: WAN IP address, public IP address, external IP address
Network Configuration
VPN Tracker supports a number of vendor-specific and vendor-independent
automatic configuration methods. In addition, manual configuration of all set-
tings is also possible.
Mode Config
A vendor-independent automatic configuration method that is capable of
transmitting the settings for the local address and the remote DNS settings
(DNS servers and search domain).
The "active" and "passive" variants may be used to resolve problems when the
general Mode Config setting does not work with a particular device.
Related Settings: Basic > Network Configuration > Local Address
Basic > Remote DNS > Receive DNS Settings from VPN Gateway
Availability: Depending on the selected device profile. Use a custom device
profile to be able to select any method.
VPN Gateway Setting: Mode Config, Config Mode, IKE-CFG
Cisco EasyVPN
An extension of Mode Config for Cisco devices that is also capable of trans-
mitting the Remote Network(s) and Perfect Forward Secrecy (PFS) setting. If
you are using EasyVPN with a custom device profile, make sure to turn on
"Identify as Cisco Unity Client" on the Advanced tab.
47