Echo Bear Cat 77353-00 - Manual (Page 6)

3 Inch Trailer Instruction Sheet
Before placing machine onto trailer, secure the trailer
in a manner that it will not move while mounting.
WARNING
1. A hoist or other lifting device will need to be used to lift
the machine into place on trailer.
2. The following are the approximate weights of the
chipper/shredders:
SC3206 - 195 lbs. (88.45 kg)
Ensure that the lifting device used is rated and certified
to lift more than the weight of the machine.
3. Orientate the machine so the discharge door (shield
assembly for CE compliant machines) is facing toward
the rear of trailer.
4. Align hole on engine mount base (1) of machine to the
inside hole on the front right plate (2) of trailer. Also
align hole on base of housing (3) to inside hole of front
left mounting flange (4).
5. Secure machine to trailer using four 5/16 x 7/8" hex
bolts (5) washers and nylock nuts.
1
2
3
4
5
5
REAR DISCHARGE CONFIGURATION-
MACHINES SERIAL # C03478 TO CURRENT
Before mounting machine to trailer, shut off power
source and remove key on engine, disconnect the
battery cables (if applicable) and make sure all moving
parts have come to a complete stop and the machine
has completely cooled down.
WARNING
Figure 3