Echo Bear Cat 77353-00 - Manual (Page 3)

3 Inch Trailer Instruction Sheet
Before placing machine onto trailer, secure the trailer
in a manner that it will not move while mounting.
WARNING
1
2
3
4
4
5
6
7
4
FRONT DISCHARGE CONFIGURATION-
MACHINES SERIAL # C03478 TO CURRENT
1. A hoist or other lifting device will need to be used to lift
the machine into place on trailer.
2. The following are the approximate weights of the
chipper/shredders:
SC3265 - 285 lbs. (129.3 kg)
SC3305 - 255 lbs. (116 kg)
SC3305E (w/o battery) - 255 lbs (116 kg)
SC3342 - 255 lbs. (116 kg)
Ensure that the lifting device used is rated and certified
to lift more than the weight of the machine.
3. Place the engine mount bracket (1) at outside hole of
front left mounting flange (2) and outside hole of rear
mounting flange (3). Make sure tabs of engine mount
bracket are to the outside of the flanges. Secure using
two 5/16 x 7/8" bolts (4), washers and nylock nuts.
4. Orientate the machine so the discharge door (shield
assembly for CE compliant machines) is facing toward
the front of trailer.
5. Align holes on base of housing (5) to center slotted
hole on front right plate (6) of trailer. Also align holes
in engine mount base (7) to engine mount bracket (1).
6. Once all holes are aligned properly, secure with four
5/16 x 7/8" bolts (4), washers and nylock nuts.
Figure 4