DR Power Tow-Behind 8.00 Premier (Pre-August 2010) - Manual (Page 35)

CONTACT US AT www.DRPower.com or CALL TOLL FREE 1-800-DR-OWNER 31
Tips:
•
It is best to trim off any side twigs from the main branch being chipped (Figure 24).
•
Green branches process quicker and easier than dry branches and soft wood is easier than hardwood.
•
Use caution with small diameter green saplings and branches. Chip these grouped or bundled together
to provide support for each other (Figure 25).
•
Make sure the Chipper finishes chipping material in the Hopper before shutting the engine off.
Hitch
Pin
USE COMMON SENSE WHEN USING THE MACHINE. LEARN TO RECOGNIZE THE CHANGE IN
SOUNDS WHEN OVERLOADED. STOP THE ENGINE IMMEDIATELY IF THE MACHINE BECOMES
JAMMED TO PREVENT DAMAGE TO THE DRIVE SYSTEM.
Figure 24
Figure 25
Bundled Saplings