DR Power Tow-Behind 8.00 Premier (Pre-August 2010) - Manual (Page 15)

CONTACT US AT www.DRPower.com or CALL TOLL FREE 1-800-DR-OWNER 11
Unpacking and Assembling the Machine
The DR LEAF and LAWN VACUUM shipped from the factory with the Wheels mounted in the Frame by
Spindle Axles. The following instructions will detail how to unpack the machine, install the Tilt Bed, and
assemble the Collector Box. Please note that the location of items in the shipping carton may differ
depending upon what optional items are included in your order. An asterisk (*) indicates an optional
item. Compare the contents of the Shipping Carton with the Parts Supplied list. If any of the parts are
missing, call Toll Free: 1-800-DR-OWNER (376-9637).
Parts supplied:
•
(2) Side Collector Box Panels
•
(1) Front Collector Box Panel
•
(1) Rear Collector Box Panel
•
(1) Centrifugal Separator with attached vacuum hose
•
(1) Blower Exit Elbow Assembly
•
(1) Trailer Frame w/Engine and Blower Assembly including Blower Inlet Hose Assembly
•
(1) Tilt Bed
• (1) Each, 7" and 8" Hose Adapter (as ordered)
•
(1) Plastic Bag containing miscellaneous mounting hardware:
- (4) 5/16" x 1/2" Wing Screws
- (4) 5/16" x 2" Wing Screws
- (4) 5/16" x 1" Bolts
- (16) 5/16" Flat Washers
- (4) 5/16" Lock Nuts
- (8) 5/16" Split Lock Washers
- (4) Clevis Pins
- (4) Hitch Clips
- (2) Rubber Washers
- (1) White Plastic Cable Tie
- (2) Hand Knobs
- (1) Tow Stand