DR Power Tow-Behind 8.00 Premier (Pre-August 2010) - Manual (Page 17)

CONTACT US AT www.DRPower.com or CALL TOLL FREE 1-800-DR-OWNER 13
Elbow Assembly
Opening the Shipping Container
•
STABILIZE THE SHIPPING CONTAINER ON FLAT TERRAIN BEFORE ATTEMPTING TO UNPACK AND
ASSEMBLE THE MACHINE.
•
WEAR EYE PROTECTION WHEN CUTTING THE BANDS. THE BANDING MAY HAVE A LOT OF
TENSION ON IT AND MAY SNAP AND CUT YOU. ALWAYS STAND TO ONE SIDE WHEN CUTTING
THE BANDS.
Tools & Supplies Needed:
•
Knife or Box Cutter
•
Gloves
•
Eye Protection
•
Metal Shears or Side Cutters
1. Stand to one side and cut the banding.
2. Remove the top of the carton, open the side
the Centrifugal Separator is on and fold down
the side (Figure 2). The staples are sharp so
be careful.
3. Remove the Blower Exit Elbow Assembly from
the cardboard (Figure 2) and set it aside.
Figure 2
Opening the Carton
or