DNF Controls ST420-VSS - Manual (Page 8)

Page 4 of 21 ST420-VSS User Manual
2. COMPONENT LIST
Qty Component DNF Part Number
1 ST420 SHOTBOX ST420-VSS
1 ST420 POWER SUPPLY 1025-0003-00
1 POWER CORD part of above
1 LANTRONIX UDS 1100 ADAPTOR 1585-0100-00
1 LANTRONIX POWER SUPPLY part of above
1 D9F-D25M CABLE part of above
1 DB9 M-M GENDER CHANGER 1030-0100-00
3. INSTALLATION
a. Attach mini DB9 M-M gender changer to the OUTPUT connector on the
rear of the ST420. Turn the hex end of the jack screws to fasten the
adaptor to the ST420.
b. Connect the D9F end of the furnished cable to the DB9 M-M gender
changer.
c. Connect the other end (D25M) of the furnished cable to the LANTRONIX
adaptor.
d. Connect one end of an Ethernet cable to the LANTRONIX adaptor.
e. Connect the other end of the Ethernet cable to the same ethernet
hub/switch that Spyder is connected to.
f. Connect the LANTRONIX power supply to the power input connector on the
LANTRONIX.
g. Connect the power supply to an AC outlet.
h. Connect the ST420 power supply to the POWER connector on the rear of
the ST420.
i. Connect the IEC connector end of the power cable into the ST420 POWER
SUPPLY.
j. Connect the other end of the power cable into an AC outlet.