DNF Controls ST420-VSS - Manual (Page 18)

Page 14 of 21 ST420-VSS User Manual
3. Follow the displayed prompt on the Shotbox and enter a Cue number.
Enter a 1, 2, or 3 digit number. Leading zeroes are not required.
Press the DELETE key to delete the last entered digit.
Press the ENTER key to complete the entry OR press the BACK or
ESC key to exit.
4. Follow the displayed prompt on the Shotbox and enter a label of 1 to
12 characters.
Press the DELETE key to delete the last entered digit.
Press the ENTER key to complete the entry OR press the BACK or
ESC key to exit.
The Label, Cue and Script number will be displayed on the face of the
Shotkey. Or Script and Label will be displayed depending on menu
setting.
b) CLEAR LEARN
1. Press the desired BANK key.
2. Press and hold the SHIFT key.
3. Press the desired Shotbox key to be cleared. The face of the Shotbox
key will be blank.
c) RECALL COMMAND KEY
1. Press the desired BANK key.
The selected BANK key’s led will turn on. The Shotbox keys will
display all LEARNs in the selected bank.
2. Press the desired Shotbox key. The Shotbox key will turn RED.
The LEARN’d Command Key and Cue number will be immediately sent to
the Spyder for recall.