DNF Controls ST420-VSS User Manual
Page 19
ST420-VSS User Manual
Page 15 of 21
d) GROUP RECALL
1. Press the GROUP key to recall more than one Command Key. The
GROUP key led will turn on.
Press the ESC key to terminate group recall. The GROUP key led will
turn off.
2. Press the desired BANK and Shotbox key. The key will turn RED to
indicate that it is selected as part of the group. Press the key again to
remove it from the group.
3. Repeat step 2 for each Bank/Shotbox key that will be part of the group.
The maximum size of the group is 10 keys.
4. Press the GROUP key to complete group selection and recall the
selected Command Keys. All keys that are part of the group will
remain RED.
e) SELECT COMMAND KEY
Select the Command Key that will be affected by the JUMP, REV, FWD,
and PVW/PGM keys.
1. Press the SELECT key. The SELECT key led will turn on.
2. Press the desired BANK key.
3. Press the desired Shotbox key. The face of the key will turn red. The
SELECT key led will turn off.
OR
Press the ESC key to exit select mode without any changes.
f) REV, FWD, PVW/PGM
1. Press the REV (<<<) or FWD (>>>) key to step forward or backward,
respectively, through the currently selected script (red Shotbox key) or
group of scripts.
When the last cue is reached, additional REV Key presses will be
ignored. When the first Cue is reached, additional FWD key presses
will be ignored.
2. Press the PVW/PGM key to jump to the PREVIEW cue of the currently
selected script or group of scripts.
3. Press the SHIFT + PVW/PGM keys to jump to the PROGRAM cue of
the currently selected script or group of scripts.